The Flag Banners comes with a single-sided custom print. The banner design is customized to your graphic artwork, and is printed on a polyester-blend mesh material by the process of dye sublimation. Our inks heavily saturate the material to create a "bleed-through" effect for our single-sided displays such as this one. Black flag trim (pocket trim) is sewn on the edge of the graphic (pole-side), leaving a pocket for pole insertion. A set of grommets are installed on the bottom of the trim in which the short bungee cord (included) can loop through and snugly attach the graphic to the base. With the default spike base, use this 8 ft. tall flag on any grass or soft, penetrable ground. Upgrade to an X-base or large water base to use on any hard ground outside, such as concrete, or indoors (ceiling height permitting).